DEF STAN 02-862 PT3-Alloy 400/k-500
Alias
SM1-M
SM2-M
SM1-U
SM1-U
Chemistry
Base Elements C(Carbon), Fe(Iron)
Element | Min | Max |
---|---|---|
P (Phosphorus) | o.04% | |
S (Sulphur) | 0.04% |
Mechanical Properties
Bolts, Screws, Studs and Stud-bolts
Mechanical Property | Min | Max |
---|---|---|
Yield Strength | 680 MPa | |
Tensile Strength | 850 MPa | 1000 MPa |
Elongation 13 | 5.63√S0% |
Nuts
Mechanical Property | Min | Max |
---|---|---|
Yield Strength | 525 MPa | |
Tensile Strength | 700 MPa | 850 MPa |
Elongation | 17 5.63√S0% |
Uses
Bolting
First level fasteners;
This area of the Defence Standard specifies the requirements for the manufacture, testing and quality assurance documentation for ferrous (carbon/low alloy steel and stainless steels) and non-ferrous metric and unified fasteners for First Level Quality assured applications.
Disclaimer:
Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.