Alloy 630 H1100


ASTM A564/A564M
ASME SA564 630 – H1100
ASTM A564 630 – H1100


Element Min Max
C (Carbon) 0.07%
Cr (Chromium) 15 17.5%
Cu (Copper) 3 5%
Mn (Manganese) 1%
Ni (Nickel) 3 5%
P (Phosphorus) 0.04%
S (Sulphur) 0.03%
Si(Silicon) 1%
Mechanical Property Min Max
Ultimate Tensile Strength (UTS) 965 Mpa
Yield Strength 795 MPa
Elongation 14%
Gauge Length A4D
Hardness (Brinell) 302 HB
Hardness (Rockwell C) 31 HRC
Charp V-Notch Impact = Room Temp. 34J

Information is given for illustrative purposes only. Tachart accepts no responsibility for the accuracy of the data contained within or the use of the data by any other party.
This page is protected by copyright but may be freely distributed but not reproduced without permission.